KRDJCZ-1电机拆装维修实训台
本实训台是为各类院校学生拆装各种电机而设计的，通过对常用多种电机的动手拆装，使学生掌握电机从里到外的构成及各组成器件的认识，根据电机拆装的特点，实训台材质采用全钢结构，坚固耐用。
配置如下：
1、拆装工具一套：拉马1幅、活动扳手1把、橡皮锤头1只、划线板、压线板1块、弯头剪刀1把、尖嘴钳1把、钢锯1把。
2、1.1KW三相鼠笼电机1台。
3、直流他（并）励电动机1台（100W）
4、钢制拆装桌1张，规格：1500mm×750mm×780mm
5、电烙铁及烙铁架1套
KRDJCZ-1 Electrical Maintenance Training disassembly Taiwan
The Training Station, for all types of college students a variety of motors designed for disassembly, through a variety of motors used hands-on disassembly, so that students master the motor from the inside out the composition and the understanding of the composition of the device, according to motor disassembly characteristics, practice sets all-steel materials, durable.
Configuration is as follows:
1, dismantling tool set: Rama 1, the activities of a wrench, a rubber hammer, dash board, a pressure wire board, elbow scissors 1, a needle nose pliers, a hacksaw .
2,1.1 KW three-phase squirrel-cage motor 1 units.
3, DC He (and) Motor and a station (100W)
4, steel removable table 1, Specification: 1500mm × 750mm × 780mm
5, electric iron and the iron frame a set of
