KRN-2005 - WL Desktop (CNC lathe) portfolio electromechanical integration NC Laboratory (transparent type)
WL CNC lathe is a desktop micro CNC lathes, CNC machine tools is Section-Equipment Corporation introduced a new generation of teaching laboratory simulation of CNC lathe, and equipped with high reliability CNC system. Machine Control System and the use of independent split-type control. The machine under ergonomic shape, electromechanical integration methods used circular structure design, Form beautiful, sophisticated design, structure innovative, simple operation, high efficiency, to be completed end, Cylindrical, inner hole, spherical, conical and other bus the quadratic curve for all of the rotary lathe processing, at the same time to complete the common thread of turning small teeth. So it particularly suited to teaching career.
This machine vertical, horizontal take knives were used precision Screw and screw, hybrid stepping motor driver, high positioning accuracy, torque, spindle using VVVF imports, stepless speed regulation can be realized. Machine tool used 4-position automatic transfer tool carrier, applied to the processing of complex shape parts.
CNC lathe machining are the main target: Hard engineering plastics, pure plastics, wood products.
The machine tool simulation software and programming support, particularly suited to institutions of higher learning, secondary schools and vocational technical schools at all levels of mechatronics laboratory equipment, numerical control machine tool programming, NC principle CAD / GAM, and other professional courses NC experiments and training.
SHANGHAI KERONG TEACHING APPARATUS CO.,LTD
English Tel: +86.21-56301098 Fax: +86.21-66613899
QQ:
MSN:
shkr123@hotmail.com
Website: www.shkr.com Email: kerong@shkr.com
This machine vertical, horizontal take knives were used precision Screw and screw, hybrid stepping motor driver, high positioning accuracy, torque, spindle using VVVF imports, stepless speed regulation can be realized. Machine tool used 4-position automatic transfer tool carrier, applied to the processing of complex shape parts.
CNC lathe machining are the main target: Hard engineering plastics, pure plastics, wood products.
The machine tool simulation software and programming support, particularly suited to institutions of higher learning, secondary schools and vocational technical schools at all levels of mechatronics laboratory equipment, numerical control machine tool programming, NC principle CAD / GAM, and other professional courses NC experiments and training.
Control System Configuration:
It consists of the Windows operating platform, Celeron 1.7 G, 17 "LCD display, fashion powder roast chassis, memory 256 M, drives 40 G, ultra-thin keyboard, 3D mouse, 52 2x CD-ROM, and other components.
Second, control system features
This control system using a standard X86-compatible framework for the hardware platform to DOS or Windows family of operating systems software for the platform, with rich software base and the full potential of escalation. Simple, reliable, excellent performance. The system can be realized Nano interpolation, high-speed and high-speed feed interpolation. The entire Chinese menu-control interface can reduce the difficulty of training, the training of personnel to shorten the time and reduce training costs. Compatible with a variety of domestic and foreign FANUC CNC system and the control procedures format. And direct reception MASTERCAM, Cimatron, Pro / E, UC and other CAD / CAM software generated control procedures. With tracking capabilities window graphics programming functions, will enable users to programming procedures at the same time observed that path. The results of the programmers can also use "fast graphics simulation," functional verification tool running track. Support for the delivery of a variety of procedures, including traditional RS232 serial interface, disk drives or floppy disk copy mode network using TCP / IP protocol high-speed transmission.
Third, an integral part of machine tools
1, by the experimental machine tool table as a base, the overall experimental form of milling machine placed the left side of the table, right side placed 17 "Flat Screen Color Monitor, laboratory tables intermediate shaft屉display control circuit boards, can be very easy to pull the drawer for electrical circuit operations at the same time stepping motor driver, inverter adjustments work. display platform Here are a dedicated mouse keyboard drawer.
4. Machine uses
1, the machine can be equipped colleges and universities, secondary schools and vocational technical schools at all levels of mechatronics laboratory equipment.
2, the machine can be used for CNC machine tools, CNC programming, NC principle to CAD / CAM, and other professional courses and training in the teaching experiment.
5. Machine communication
1, the machine in the laboratory with any one computer can communicate. Communication with RS232 serial communication, copying floppy disk drives, but generally use the TCP / IP protocol for high-speed transmission.
2, it can laboratory NC simulation software and network transmission.
It consists of the Windows operating platform, Celeron 1.7 G, 17 "LCD display, fashion powder roast chassis, memory 256 M, drives 40 G, ultra-thin keyboard, 3D mouse, 52 2x CD-ROM, and other components.
Second, control system features
This control system using a standard X86-compatible framework for the hardware platform to DOS or Windows family of operating systems software for the platform, with rich software base and the full potential of escalation. Simple, reliable, excellent performance. The system can be realized Nano interpolation, high-speed and high-speed feed interpolation. The entire Chinese menu-control interface can reduce the difficulty of training, the training of personnel to shorten the time and reduce training costs. Compatible with a variety of domestic and foreign FANUC CNC system and the control procedures format. And direct reception MASTERCAM, Cimatron, Pro / E, UC and other CAD / CAM software generated control procedures. With tracking capabilities window graphics programming functions, will enable users to programming procedures at the same time observed that path. The results of the programmers can also use "fast graphics simulation," functional verification tool running track. Support for the delivery of a variety of procedures, including traditional RS232 serial interface, disk drives or floppy disk copy mode network using TCP / IP protocol high-speed transmission.
Third, an integral part of machine tools
1, by the experimental machine tool table as a base, the overall experimental form of milling machine placed the left side of the table, right side placed 17 "Flat Screen Color Monitor, laboratory tables intermediate shaft屉display control circuit boards, can be very easy to pull the drawer for electrical circuit operations at the same time stepping motor driver, inverter adjustments work. display platform Here are a dedicated mouse keyboard drawer.
4. Machine uses
1, the machine can be equipped colleges and universities, secondary schools and vocational technical schools at all levels of mechatronics laboratory equipment.
2, the machine can be used for CNC machine tools, CNC programming, NC principle to CAD / CAM, and other professional courses and training in the teaching experiment.
5. Machine communication
1, the machine in the laboratory with any one computer can communicate. Communication with RS232 serial communication, copying floppy disk drives, but generally use the TCP / IP protocol for high-speed transmission.
2, it can laboratory NC simulation software and network transmission.
6, machine tool performance characteristics
Three-jaw chuck diameter of 125 mm
Rotary bed on the largest diameter 155 mm
Work maximum length of 300 mm
Electric Tool: Four-Position
Fast-forward speed of 15 mm / min
The main motor power 0.37 kw
Pulse equivalent 0.005-0.01 mm (arbitrary adjustable)
Control / interaction axis of 2 / 2
The largest size -9999.999-99999.999 mm Programming
Interpolation methods: straight line, arc, thread, Z-spline curves
Programming methods: G, M, F, S, T (SO code)
Operational modes: automatic, single-paragraph / continuous, manual, to move, to reference point, suspended spindle acceleration and deceleration, feed processing slowdown.
System parameters: memory and processing power restoration threshold, pulse equivalent, the compensation gap
Graphics: show tool path
Process capacity: × B (depending on the actual hard drive capacity or DOW module capacity)
Spindle speed, continuously variable: 50 ~ 1500 (0-10V)
Long-width × high; 1080 × 600 × 1370mm
Three-jaw chuck diameter of 125 mm
Rotary bed on the largest diameter 155 mm
Work maximum length of 300 mm
Electric Tool: Four-Position
Fast-forward speed of 15 mm / min
The main motor power 0.37 kw
Pulse equivalent 0.005-0.01 mm (arbitrary adjustable)
Control / interaction axis of 2 / 2
The largest size -9999.999-99999.999 mm Programming
Interpolation methods: straight line, arc, thread, Z-spline curves
Programming methods: G, M, F, S, T (SO code)
Operational modes: automatic, single-paragraph / continuous, manual, to move, to reference point, suspended spindle acceleration and deceleration, feed processing slowdown.
System parameters: memory and processing power restoration threshold, pulse equivalent, the compensation gap
Graphics: show tool path
Process capacity: × B (depending on the actual hard drive capacity or DOW module capacity)
Spindle speed, continuously variable: 50 ~ 1500 (0-10V)
Long-width × high; 1080 × 600 × 1370mm
CNC, WL CNC Milling Machine
WL-type CNC milling machine is a mini-desktop CNC milling machine, Branch-NC Machine Equipment Corporation introduced a new generation of teaching laboratory simulation of CNC milling machine, equipped with high reliability CNC system. Machine Control System and the use of independent split-type control. The machine can achieve three sitting linkage, complete plastic, plexiglass products, milling, drilling, hinge, the cutting campaign, and to the processing of complex shape parts.
WL-type CNC milling machine is a mini-desktop CNC milling machine, Branch-NC Machine Equipment Corporation introduced a new generation of teaching laboratory simulation of CNC milling machine, equipped with high reliability CNC system. Machine Control System and the use of independent split-type control. The machine can achieve three sitting linkage, complete plastic, plexiglass products, milling, drilling, hinge, the cutting campaign, and to the processing of complex shape parts.
Control system features
This control system using a standard X86-compatible framework for the hardware platform to DOS or Windows family of operating systems software for the platform, with rich software base and the full potential of escalation. Simple, reliable, excellent performance. The system can be realized Nano interpolation, high-speed and high-speed feed interpolation. The entire Chinese menu-control interface, suitable for China's national conditions. The difficulty can reduce training, the training of personnel to shorten the time and reduce training costs.
Compatible with a variety of domestic and foreign FANUC CNC system and the control procedures format. And direct reception MASTERCAM, Cimatron, Pro / E, UC and other CAD / CAM software generated control procedures.
With tracking capabilities window graphics programming functions, will enable users to programming procedures at the same time observed that path. The results of the programmers can also use "fast graphics simulation," functional verification tool running track.
Support for the delivery of a variety of procedures, including traditional RS232 serial interface, disk drives or floppy disk copy mode network using TCP / IP protocol high-speed transmission.
Machine performance characteristics
Fast-forward speed of 15 mm / min
The main motor power 0.37 kw
Pulse equivalent 0.005-0.01 mm (arbitrary adjustable)
Control / interaction axis of 3 / 3
The largest size -9999.999-99999.999 mm Programming
Interpolation methods: straight line, arc, thread, Z-spline curves
Programming methods G, M, F, S, T (SO code)
Operational modes: automatic, single-paragraph / continuous, manual, to move, to reference point, suspended spindle acceleration and deceleration, feed processing slowdown.
Graphics: show tool path
Process capacity: × B (depending on the actual hard drive capacity or DOW module capacity)
Spindle speed, continuously variable 50 ~ 1500 (0-10V)
Taiwan workpiece size of 445 × 170mm
His 155 mm X-axis
Itinerary 90 mm Y-axis
His 155 mm Z-axis
Long-width × high 825 × 695 × 1840mm
WLM台式(数控车床)组合机电一体化数控实验室（透明式)This control system using a standard X86-compatible framework for the hardware platform to DOS or Windows family of operating systems software for the platform, with rich software base and the full potential of escalation. Simple, reliable, excellent performance. The system can be realized Nano interpolation, high-speed and high-speed feed interpolation. The entire Chinese menu-control interface, suitable for China's national conditions. The difficulty can reduce training, the training of personnel to shorten the time and reduce training costs.
Compatible with a variety of domestic and foreign FANUC CNC system and the control procedures format. And direct reception MASTERCAM, Cimatron, Pro / E, UC and other CAD / CAM software generated control procedures.
With tracking capabilities window graphics programming functions, will enable users to programming procedures at the same time observed that path. The results of the programmers can also use "fast graphics simulation," functional verification tool running track.
Support for the delivery of a variety of procedures, including traditional RS232 serial interface, disk drives or floppy disk copy mode network using TCP / IP protocol high-speed transmission.
Machine performance characteristics
Fast-forward speed of 15 mm / min
The main motor power 0.37 kw
Pulse equivalent 0.005-0.01 mm (arbitrary adjustable)
Control / interaction axis of 3 / 3
The largest size -9999.999-99999.999 mm Programming
Interpolation methods: straight line, arc, thread, Z-spline curves
Programming methods G, M, F, S, T (SO code)
Operational modes: automatic, single-paragraph / continuous, manual, to move, to reference point, suspended spindle acceleration and deceleration, feed processing slowdown.
Graphics: show tool path
Process capacity: × B (depending on the actual hard drive capacity or DOW module capacity)
Spindle speed, continuously variable 50 ~ 1500 (0-10V)
Taiwan workpiece size of 445 × 170mm
His 155 mm X-axis
Itinerary 90 mm Y-axis
His 155 mm Z-axis
Long-width × high 825 × 695 × 1840mm
SHANGHAI KERONG TEACHING APPARATUS CO.,LTD
English Tel: +86.21-56301098 Fax: +86.21-66613899QQ:
MSN:shkr123@hotmail.comWebsite: www.shkr.com Email: kerong@shkr.com
