KRH202 Motor and Electric Device Technology Experiment
Motor and Electric experimental device is based on technology "motor", "electrical and electric drive," "Electric Control Equipment Factory" and "micro motor" such courses teaching pilot program requirements, but also made reference to the recent years Colleges use the motor drive and experimental materials and design, the device fully satisfy the institutions motors, electrical technology teaching experimental requirements.
Experimental device shows that the use of all digital instrumentation, the electrical installation in the common rail, removable convenient loading motor Dynamometer some convenient operation, loading and MS curve mapping only by adjusting potentiometer; Torque the figures show that speed table, intuitive readings, the use of photoelectric yards speed measurement accuracy and stability.
Experimental device shows that the use of all digital instrumentation, the electrical installation in the common rail, removable convenient loading motor Dynamometer some convenient operation, loading and MS curve mapping only by adjusting potentiometer; Torque the figures show that speed table, intuitive readings, the use of photoelectric yards speed measurement accuracy and stability.
Performance indicators:
(1) Input Current: three-phase four-380 V ± 5% 50Hz ± 1Hz
(2) working environment: environmental temperature: 5 ~ 40 ° C
(3) Relative Humidity: <75%
(4) capacity: <1.5KVA
(5) the electrical capacity: <200w
(6) form factor: 164 cm × 75 cm × 166cm
(7) physical security protection: main circuit isolation transformer output, a current-mode, voltage-leakage protection devices.
(8) timer and alarm records Instrument (service management): a set time, when the alarm, cut off power and records of the number of warning, and other functions.
(9) AC power: three-phase 0 to 450 V, single-phase 0 ~ 250 V continuous adjustable, with the output over-current protection, sound and light alarm, break phase instructions.
(10) high-precision computer-exchange table: the protection of a super-tripping range from the high-performance 16-bit MCU, range automatic switching.
(11) DC armature voltage regulator power supply: 80 ~ 250 V continuous adjustable, and overcurrent short-circuit protection.
(12) Regulated DC excitation voltage: 220 V/0.5A, current 0 to 2.5 A continuous adjustable, with three first half of the output surveillance is to pave the way protection. (13) torque, speed measurement: speed through the sensor measurement, measurement speed through the photoelectric yards, figures show.
Second, experimental elements:
(1) DC motor pilot project
(B) transformer pilot project
(C) induction motor pilot project
(D) synchronous motor pilot project
(5) electric drive pilot projects
(6) motor control pilot project
(7) The electrical control equipment factory pilot projects
All colleges and universities under the different experimental content, choose different experimental components, the experimental units can be broadly divided into the following four requirements:
(1) A motor and electrical technology experimental device
(2) B-type motors and electrical technology experimental device
(3) Type C motor and electrical technology experimental device
(4) D-type motors and electrical technology experimental device
(1) Input Current: three-phase four-380 V ± 5% 50Hz ± 1Hz
(2) working environment: environmental temperature: 5 ~ 40 ° C
(3) Relative Humidity: <75%
(4) capacity: <1.5KVA
(5) the electrical capacity: <200w
(6) form factor: 164 cm × 75 cm × 166cm
(7) physical security protection: main circuit isolation transformer output, a current-mode, voltage-leakage protection devices.
(8) timer and alarm records Instrument (service management): a set time, when the alarm, cut off power and records of the number of warning, and other functions.
(9) AC power: three-phase 0 to 450 V, single-phase 0 ~ 250 V continuous adjustable, with the output over-current protection, sound and light alarm, break phase instructions.
(10) high-precision computer-exchange table: the protection of a super-tripping range from the high-performance 16-bit MCU, range automatic switching.
(11) DC armature voltage regulator power supply: 80 ~ 250 V continuous adjustable, and overcurrent short-circuit protection.
(12) Regulated DC excitation voltage: 220 V/0.5A, current 0 to 2.5 A continuous adjustable, with three first half of the output surveillance is to pave the way protection. (13) torque, speed measurement: speed through the sensor measurement, measurement speed through the photoelectric yards, figures show.
Second, experimental elements:
(1) DC motor pilot project
(B) transformer pilot project
(C) induction motor pilot project
(D) synchronous motor pilot project
(5) electric drive pilot projects
(6) motor control pilot project
(7) The electrical control equipment factory pilot projects
All colleges and universities under the different experimental content, choose different experimental components, the experimental units can be broadly divided into the following four requirements:
(1) A motor and electrical technology experimental device
(2) B-type motors and electrical technology experimental device
(3) Type C motor and electrical technology experimental device
(4) D-type motors and electrical technology experimental device
电机及电气技术实验装置
SHANGHAI KERONG TEACHING APPARATUS CO.,LTD
English Tel: +86.21-56301098 Fax: +86.21-66613899
QQ:
MSN:
shkr123@hotmail.com
Website: www.shkr.com Email: kerong@shkr.com
